Network Ernitec Cube Camera
·
Quick Start Guide
26
6
Wifi Network Setup
You can connect the camera with network cable or with Wi-Fi.
To connect camera with Wi-Fi, there are two methods:
6.1
With WPS button
You can use this method if your internet Box is equipped with the
WPS button.
Steps:
1.
Power on the camera.
2.
Press the WPS button on the Internet Box.
3.
Press the WPS button on the camera.
6.2
With “Ernitec Cloud” Mobile App Or Ernitec-
Cloud website
Steps:
1. Connect the camera to the internet box, by using the network
cable provided in the camera box.
2. Register the camera (Refer to the chapter 4).
3. From the website Ernitec-Cloud, or with the mobile application, go
to the camera setting, the Wi-Fi setting.
4. Select the Wi-Fi network from the list.
5. Enter the Wi-Fi password and apply.
6. If the Wi-Fi is connected, you will get a success message, otherwise
come back to the step 4.
Summary of Contents for MicroView MVCLOUD-101
Page 1: ...Camera Quick Start Guide Network Cube Camera MVCLOUD 101...
Page 27: ...27...
