Note
：
Does not allow excessive bending fiber, the radius of curvature should
not be less than 10cm;
Ensure the cleanliness of the fiber surface;
Please do not look directly into the optical fiber connector with your eyes as this
may cause eye injury
3.3 Check before power on
Check whether the outlet power supply meets the switch specifications;
Check the power, switches, racks and other equipment have been properly
grounded;
Check whether the switch and other network devices are connected properly
3.4 Device initialization
The switch automatically initializes when the power switch is turned on.
Indicator will appear the following situation:
After the power is turned on, the power indicator remains on, the other
indicator is off at this time;
After about 1 second, all lights except for the power light turn on for about 35
seconds and then turn off; when the SYS light goes flashing, the system runs
normally
Port LEDs indicates the connection status of each port, indicating that the
switch has started to work normally
3.5 Web Login
Step1
、
In the normal operation of the device, connect the computer to the switch's
RJ45 port by network cables
