Installation desk requirement
Regardless of whether the switch is installed in a rack or on another horizontal
workbench, be aware of the following:
Make sure the rack or workbench is stable, strong, and can withstand at least
5.5Kg weight;
Make sure the rack has a good cooling system, or maintain good indoor
ventilation;
Make sure the rack is well grounded, the power outlet and switch are within
1.5 meters
Prepare tools for installation
You may need to use a screwdriver during installation, electrostatic wrist strap,
fiber optic cable and other tools to prepare your own
2.2 Product installation
19-inch standard rack installation
ELECTRA-T24 is designed according to the standard 19-inch rack size, you
can easily install to the rack, the specific installation steps are as follows:
First, Check rack grounding and stability
；
Second, Install the two L-brackets in the accessory on each side of the switch
panel and secure with the screws provided in the accessory
Third, place the switch in an appropriate place in the rack and be supported
by the bracket. Screw the L-shaped bracket to the guide groove fixed on both
ends of the rack to ensure that the switch is stable and horizontally installed
on the rack
Note
：
Good grounding rack is anti-static equipment, anti-leakage, lightning
protection, anti-jamming important guarantee, so to ensure that the rack
ground wire properly installed;
Installation equipment within the rack from the bottom up, to avoid
overload installation;
Avoid placing other heavy objects on switch to avoid accidents;
Ensure heat dissipation and air circulation.
