EDNS1000-4CH User Guide
21
Figure 3.4.5. PTZ Control setup screen.
To control the PTZ functions of the camera, connect the controller to the RS-485 port.
In the PTZ control setting in the setup menu, user can select or set the protocol type of the
camera which is the same as the one that is installed on the site. If the camera has a specific
camera ID, select the camera ID using Left/Right buttons.
3-5. Network
Network parameters can be input in this screen. These parameters are used for remote clients who are
connected to the DVR over the network.
Table 3.5.1. Menu items in Network Setup screen
Item
Description
PORT
RTSP port number
REMOTE ACCESS
Enable/Disable network client access
For speed dome cameras that supports RS-485, connect them directly to the RS-485
port. But if the camera is controlled with RS-232C, it is needed to use Signal Converter
(RS-485 to RS-232C).
