GB-23
D
GB
F
NL
I
E
Chimney
Double-walled coaxial chimney with integrated flue
gas and air supply route, category C33.
▷
Internal/External diameter: 100/150 mm, maxi-
mum length: 5 m.
CAUTION
To avoid damage during operation, please observe
the following instructions.
– The TR is only CE tested and approved with
the coaxial chimney described below.
– Do not exceed the maximum length of the
chimney. Otherwise the CE approval will be
voided and the function of the device may be
impaired. The supplier/manufacturer cannot
accept liability for damage resulting thereof.
– Check the applicable building regulations,
standards and the relevant accident preven-
tion regulations before installation. The same
applies to the erection and maintenance of a
scaffold.
▷
The design of the chimney depends on the prem-
ises and the roof construction.
▷
Before installation, the site and any wall mounting
which may be required for a chimney length in
excess of 2 m must be defined.
▷
The elements are sealed and connected using
clamp strips. Each chimney element is supplied
with a clamp strip. A seal is provided for each
clamp strip which is either integrated or sup-
plied loose.
▷
The clamp strips are only designed for sealing
and connection purposes, not for absorbing
axial forces.
N70000003
1
6
5
2
4
3
9
8
7
Designation
Order number
Length
[mm]
Roof hood
N70000004
N70000003
1300
Roof hook
N70000007
Telescopic pipe
N70000005
950 – 1740
4
Condensate vessel N70000006
140
5
Pipe
N70000008
450
6
Pipe
N70000009
950
7
90° elbow
N70000012
8
45° elbow
N70000011
9
2 x cover plates
N70000010
▷
Any roof bushing depends on the roof construc-
tion and must be ordered separately.
Examples of application
This example of application shows the chimney as
a standard kit.
▷
The telescopic pipe is adjusted to minimum
length (maximum length) to match the wall height.
25
°
400
208
674
~
345
950 (1740)
900
~
2220 (~
3010)
~
1435 (~
2225)
2390 (3180)
Standard chimney kit, Order No. N70000003: roof
hood, roof hook, telescopic pipe and condensate
vessel.
