Erma Electronic TM 2500, Instruction Manual

Page: 14 / 28

• The display shows the parameter number of the selected programming level
e.g.: “0-00" => Parameter 0 of programming level 0
e.g.: ”1-00" => Parameter 0 of programming level 1
Leaving a programming level
• Press “+”-button or “-”-button until the display shows “xEnd”
e.g.: “0End” =>leaving programming level 0
e.g.: “1End” =>leaving programming level 1
• Confirm the display “xEnd” by pressing “P”-button
• The display shows the programming level
e.g. “P-00" => programming level 0
e.g. ”P-01" => programming level 1
Selection of a parameter
• Selection the parameter by pressing “+”-button or “-”-button
• Confirm the parameter by pressing “P”-button
• The display shows the last programmed value of the selected parameter
Change and confirm a selected parameter
• Change the parameter by pressing the “+”-button or “-”-button
• Confirm the parameter by pressing “P”-button
• The display shows the programming level and the number of the parameter
e.g.: “0-05" => Parameter 5 of programming level 0
6.1. Summary of the programming level
The parameters of the panel meter are organized in different programming levels.
P-00: Programming level for general configuration of the panel meter
The function of the panel meter configuration is used to adapt the sensor and the
panel meter.
P-01: Reserved for future aplications
P-02: Programming level for maximum value
This programming level is used for the different peak value modes and its parameters.
6. Procedure of programming
13 ERMA-Electronic GmbH