Erle Robotics ERLE-COPTER, Assembly Instructions Manual

Page: 8 / 27

1
Soldering the ESCs and the XT-60
Mounting XT-60 male connector
In
troduce the wires into the
connector and solder them
Introduce the heat shrinks tube and heat them up
NOTE : It is important to check with the multimeter that the welds are well done
ERLE-COPTER DIY UBUNTU CORE DRONE KIT 8
Attention: Be careful while
soldering, notice that the
solder joints must be small
enough not to obstruct other
frame componentes.