Erle Robotics ERLE-COPTER, Assembly Instructions Manual

Page: 6 / 27

Battery
Power Module
RC receiver
GPS + COMPASS
Additional components
The Power Module incorporates
both a way to power your autopilot,
accessories and report battery volt-
age and curret to the PXF. The
on-board switching regulator out-
puts 5.3V at a maximum of a 2.25A,
and can be used up to 18 Volts (4S
LIPo) and at a maximum of 90 amps.
It is ready to use with XT-60.
An electric battery is a device con-
sisting of two or more electrochemi-
cal cells that convert stored chemical
energy into electrical energy.
Receives the radio values from Radio
Control and shares it with Erle-Brain
using PPM encoding.
Determines the position of the
copter and its cardinal orientation. It
must be placed in the highest part of
the vehicle for better satellite
connection and to avoid inter-
ference with Erle-Brain.
ERLE-COPTER DIY UBUNTU CORE DRONE KIT 6