User Manual
TM
40
Find the setting for the Molecode™ S , automa-
tic detection of filter saturation by solvents.
The automatic Molecode™ S detector is automatically activated when the ventilation
system of your Captair® Flex™ fume hood is started.
It uses a sensor designed to detect various organic vapors and gases, which, based on the
parameters set for the sensor, make it possible to detect saturation of the main filter.
How do you modify the settings of the sensor ?
Before turning on your Captair® Flex™ fume hood for the first time, verify that the de-
tector setting corresponds to the code provided by the erlab® laboratory after analyzing
and validating your application. This configuration was factory-set using the information
provided.
This information is available at any time on your Valipass® form,
which is attached to the control panel of your Captair® Flex™ fume hood.
To enter this setting, refer to section 1-5 of the chapter on “Navigating the digital display
screen.”
For the detection of a single chemical:
Refer to the limits listed on the next page.
MODIFYING THE LIMIT SETTINGS FOR THE UNIT
For the detection of multiple chemicals:
Contact your E.S.P.® agent as soon as possible in order to determine the limit value
corresponding to your application.
Molecode™ S:
AUTOMATICALLY DETECTING FILTER SATURATION
Summary of Contents for Captair Flex M Series
Page 52: ...User Manual TM 52 WARNING ...
