Ericsson TH688 User Manual Download Page 39 | Manualshive

Page: 39 / 56

background image

Handling More than One Call (GSM only)

The phone allows you to handle more than one call simultaneously. This
means that you may hold a call in progress and make or answer a second
call and then switch between the two calls.

Note! For information on how to handle more than one call in a DECT
network, please consult your DECT network operator.

How to Activate the Call Waiting Service

To be able to receive a second call, you must activate the Call Waiting
service.

❶

Select Call Waiting from the

ACCESS

menu.

❷

Press YES to activate.

There may be a short delay before the network responds. In the
meantime, the message Please wait is displayed. This is followed by the
message Call waiting ON.

How to Cancel Call Waiting

❶

Select Call Waiting from the

ACCESS

menu.

❷

Scroll to Cancel.

❸

Press YES to cancel Call Waiting.

The Get status option lets you check whether the service is activated or
not.

How to Make a Second Call – Alt. 1

❶

Clear the display by pressing CLR while the first call is in progress.

❷

Press YES to put the current call on hold. The message 1 on hold is
displayed.

❸

Enter the number you wish to call, or recall it from the phone book,
and press YES.

How to Make a Second Call – Alt. 2

❶

Enter the number you wish to call while the first call is in progress.

❷

Press YES to make the call. The message 1 on hold is displayed.

Receiving a Second Call

You will hear a tone in the ear piece and the message Call wait appears
in the display if the Call Waiting function is activated.

How to End Current Call and Accept Waiting Call

❶

Press NO to end the current call.

The question Answer? appears.

❷

Press YES to answer the waiting call.

How to Put Current Call on Hold

●

Press YES to put the current call on hold.

The message 1 on hold appears.

How to Reject Waiting Call

●

Press ‘0’ followed by YES to reject the waiting call and continue the

current call.

The waiting call is cleared. If the caller’s network supports it, the
caller will hear a busy tone.

Note! If Divert On busy is activated, the waiting call is diverted to the
number you have specified.

How to Switch Between Two Calls

●

Press YES to switch between the active call and the call on hold.

How to End the Current Call

❶

Press NO to end the current call.

The message Retrieve held call? appears.

❷

Press NO to end the held call or press YES to return to the held call.

Note! If you do not press YES or NO within three seconds, the message
Retrieve held call? disappears from the display. The held call is ended
automatically.

EN/LZT 126 1452 R2A

31

«
...
37
38
39
40
41
...
»

Summary of Contents for TH688

























































Reviews:

No comments

Related manuals for TH688

Brand: Olympia Pages: 52

Brand: TCL Pages: 74

Brand: Docomo Pages: 596

Brand: Micromax Pages: 14

Home SmartPhone

Brand: BT Pages: 8

Brand: Alcatel Pages: 61

Brand: HTC Pages: 139

Soundpoint IP550

Brand: Polycom Pages: 4

Brand: Avaya Pages: 242

Brand: Zte Pages: 24

Brand: Xiaomi Pages: 2

Brand: Zte Pages: 114

Brand: Zte Pages: 74

Brand: Nokia Pages: 1

Brand: Nokia Pages: 1

Brand: Nokia Pages: 66

Brand: Nokia Pages: 71

Brand: Nokia Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands