Ericsson T18di, User Manual

Page: 66 / 84

62 Data, Fax, and Internet Calls
No
t f
or
co
m
m
er
cia
l u
se
- E
ric
ss
on
In
c. 5 Select Search for the best driver for your device (recommended)
and click Next .
6 Select the appropriate CD-ROM drive and click Next .
7 When Windows is now ready to install the best driver for this
device appears, click Next .
8 When Windows has finished installing the software that your
new hardware device requires appears, click Finish .
9 When your desktop returns, verify that your modem is properly
installed. From the Start menu on your Windows desktop, click
on Settings , then Control Panel . Double-click the Modems icon.
10 When the Modem Properties screen appears, click on the
description of your modem and click the Diagnostics tab. Note
the COM port to which your modem is assigned.
11 Click OK to proceed.
Manual Installation of Your Modem Driver or
Voice Call Dialer
Complete the following steps to manually install the INF file on
your computer if you are running Windows 95/98
1 Turn On your Ericsson mobile phone.
2 Connect one end of your serial cable to your Ericsson mobile
phone and the other end to your computer’s serial port.
3 From the Start menu on your Windows desktop, click on Set-
tings , then Control Panel . Double-click the Modems icon.
4 Click Add .
5 At the Install New Modem screen, select Other . Click Next .
6 At the next Install New Modem screen, select Don’t run Hard-
ware Installation Wizard then click Next .
7 At the next Install New Modem screen, select Don’t detect my
modem, I will select it from a list then click Next .
8 At the next Install New Modem screen, click on Have Disk .
9 At the Install from Disk screen, select D:\ at Copy from Manufac-
turer’s Disk (if your CD-ROM drive is not drive D, type the cor-
rect CD-ROM drive designation).
10 At the Install New Modem screen, select E ricsson Voice Call
Dialer , then click Next .
11 Select the COM port to which your Ericsson mobile phone is
connected and click Next .
12 When Your modem has been set up successfully appears, click
Finish .
13 When your desktop returns, verify that your modem is properly
installed. From the Start menu, click on Settings , then Control
Panel . Double-click the Modems icon.
14 When the Modem Properties screen appears, click on the
description of your modem and click the Diagnostics tab. Note
the COM port to which your modem is assigned.
15 Click OK to proceed.
Troubleshooting
1 You cannot set up or maintain a data/fax session.
This will occur if you are inadvertently originating a voice call
when attempting a data/fax call or if the data/fax profile icon does
not appear on your phone’s display after you attempt to dial or