Ericsson S-825 Series, Installation Manual, Page: 25 / 36

12
Installing The Weatherproof Box
1. Install the weatherproof case base mounting bracket (19C337200G1)
to the motorcycle mounting bracket (customer supplied and installed)
with the four 1/4 X 20 X 3/4 inch cap screws and lock nuts provided.
See Figure 5.
If the Rear Mount Antenna Option is used, refer to the
antenna installation procedures and install the antenna
mounting bracket now.
NOTE
2. Mount the weatherproof box to the mounting base (19C337200G1)
using the six 1/4-20 x 3/4-inch cap screws and locknuts provided.
Position the weatherproof box so that the cable access cutout is
towards the front of the motorcycle.
When using the recommended antenna ground strap,
(top mount applications only) install the end of the
braided and sleeved ground strap with the small terminal
under the center rear bolt head as shown in Figure 4.
NOTE
3. Install the bottom mounting plate, 19D903778P1, using the four 10 x
32 screws and washers supplied. Refer to Figure 6 to view an
assembled unit. When installed correctly, the mounting plate will be
approximately centered, side-to-side, in the weatherproof box. The lips
on the mounting plate will be face down, the rubber pad is topside.
Figure 5. Weatherproof Box Mounting
25
Figure 17. Radio Connections