8
OPI-II
Preparing the Console
Adjusting the tone ringer character
You can change the tone ringer to ten different characters.
Press
You enter programming character adjustment mode.
Dial any digit 0-9 to select a ringer character
Selected tone will be heard. The last digit pressed will be stored
when you exit programming mode.
Press to exit
Note:
The console must be idle or in absent/night mode.
Tone ringer should be audible until exit of programming
mode.
Manual or automatic answer
The console can be used in automatic or manual mode.
In automatic mode, calls are answered immediately without the
aid of pressing a key.
Press to activate automatic answering
(To return to manual answering press the key again.)
The display shows that calls will be automatically answered.
Note:
If the console is programmed for automatic
answer, you do not need to press the answer/extend key
in order to answer calls.
