Service Facilities
19
MD110 OPI 3213
User Guide
ON HOLD
Putting an ongoing call temporarily on hold leaves the
console free to perform other functions. The call is time
supervised, you are recalled if the call is not retrieved within
a certain time period.
The call being put on hold must be in speech connection
with the console, e.g. either <-or -> must be displayed and
the other side of the display must be idle.
To put a call on hold:
Press one of the keys to connect the call
To retrieve the last call put on hold, the console must be in
idle state:
Press
The call is retrieved.
The display shows that the party is an extension.
The display shows that the party is an external line.
EXT
222
RCL 15 <-
TRK line data RCL
<-
<CLR
or
CLR>
or
RCL
OPR
TRK
or
To put on hold using loop keys, LP
An alternative method to put a call on hold is by using a
loop key.
To put the call on hold:
Press a free loop key
The corresponding loop key number is displayed, the key
lamp flashes and the console is cleared.
To retrieve the call:
Press the relevant loop key
The LP lamp extinguishes and you have speech connection
with the party that was put on hold.
The display shows that the party is an extension.
The display shows that the party is an external line.
LP
LP
EXT 222
RCL 15 <-
TRKline data RCL
<-
(continued)
