Marconi OMS 870 R3.0 Quick Reference Guide
1/1531-CRA 119 0513/30 Uen A 2007-11-15
2-34
N O T E !
Pin 4,5 and 7 are only used for debug purposes.
1.
Connect the VT100 interface of the network element to a free
COM port of the PC running the VT-100 application.
2.1.1.2
Invoke CLI
2.
Enter
COM port
name and select
OK
.
3.
An CLI session is invoked by typing
omscli
in terminal window.
User authentication (password, 8-12 ASCII characters) is
required, as the following session start-up sequence shows.
Default password
is omscli.
>CLI
--------------------------------------------------
OMS 870 Command Line Interface
--------------------------------------------------
Enter CLI password:
******
CLI>
4.
When access has been granted, you can define the following
OMS 870 parameters:
IP-Configuration(Management-Port):
Show-Current-Alarms:
Change-Passwords: Manage CLI/TELNET passwords
Erase-CDB:
Reset-Device:
Display-Event-Log:
Clear-Event-Log:
Community-Handler:
Management-Modes:
User-Management (UMA):
Running-Config:
Exit:
It is sufficient to type leading characters of the command name to
avoid ambiguity – the same applies to keywords.
