Ericsson HN290dp, Quick Installation Manual

Page: 7 / 16

Installation 7
- to the USB port - to the USB port - to the USB port - to the USB port - to the USB port
NOTE! NOTE! NOTE! NOTE! NOTE! DO NOT connect the USB cable yet.
Insert the provided “Drivers & Documentation” CD and follow the
instructions given in step 4.
3 3 3 3 3 CONNECT THE POWER SUPPL CONNECT THE POWER SUPPL CONNECT THE POWER SUPPL CONNECT THE POWER SUPPL CONNECT THE POWER SUPPLY Y Y Y Y
Connect the provided Power cable Power cable
Power cable Power cable
Power cable to the POWER POWER
POWER POWER
POWER socket on
your HN290dp and plug the power supply adapter into a power
source.
Start the HN290dp Start the HN290dp Start the HN290dp Start the HN290dp Start the HN290dp by pressing the Power Power Power Power Power button on the back
of the HN290dp.
4 4
4 4
4 INST INST
INST INST
INSTALL USB DRIVERS ALL USB DRIVERS
ALL USB DRIVERS ALL USB DRIVERS
ALL USB DRIVERS
NOTE! NOTE!
NOTE! NOTE!
NOTE! This should only be done if you have connected a computer
via the USB interface, otherwise continue to step 5.
DO NOT connect the USB cable until you are instructed by the instal-
lation program.
For USB connection you need to install USB drivers to your PC.
Follow the instructions below to install USB drivers and connect the
HN290dp to the USB interface.
1 . 1 .
1 . 1 . 1 . Close ALL Windows applications and insert the provided “Drivers
& Documentation” CD into your CD-ROM drive.
2 . 2 .
2 . 2 . 2 . The CD starts automatically and the following window appears:
If Autostart fails, select Start > Run Start > Run Start > Run Start > Run Start > Run , type D:\startup.exe D:\startup.exe D:\startup.exe D:\startup.exe D:\startup.exe
(where D: is the letter of your CD-ROM drive) and press Enter.