Ericsson HN290dp, Quick Installation Manual

Page: 11 / 16

Product Description 11
PRODUCT DESCRIPTION PRODUCT DESCRIPTION
PRODUCT DESCRIPTION PRODUCT DESCRIPTION PRODUCT DESCRIPTION
BACK P BACK P BACK P BACK P BACK PANEL AND CONNECTORS ANEL AND CONNECTORS ANEL AND CONNECTORS ANEL AND CONNECTORS ANEL AND CONNECTORS
The illustration below describes connectors and buttons on the
HN290dp and can be used as a reference when connecting the router.
A D S L A D S L A D S L A D S L A D S L
For connecting
the HN290dp to
the ADSL service
port, using the
supplied ADSL
Line cable.
POWER POWER POWER POWER POWER socket for
connecting the
HN290dp to a power
source, using the
supplied Power
Adapter with connect-
ing cable.
E T H E R N E T E T H E R N E T E T H E R N E T E T H E R N E T E T H E R N E T
Ethernet 10/100 Base-T port
for connecting the HN290dp
to a client PC, using the
supplied Ethernet cable.
U S B U S B U S B U S B U S B
For connecting
the HN290dp to
a PC USB port,
using the
supplied USB
cable.
POWER POWER POWER POWER POWER button
for turning On/Off
the HN290dp
RESET RESET RESET RESET RESET button (tiny hole)
used to restore the
HN290dp to its original
factory default settings.
Figure: Back Panel on the HN290dp
Figure: Front Panel on the HN290dp
FRONT P FRONT P
FRONT P FRONT P
FRONT PANEL AND LED INDICA ANEL AND LED INDICA
ANEL AND LED INDICA ANEL AND LED INDICA
ANEL AND LED INDICATORS TORS
TORS TORS
TORS
The HN290dp is equipped with six LEDs on the front panel as shown
in the illustration below. A general description of each LED is provided
in the table on the next page (from left to right).