Ericsson DT290 User Manual Download Page 69

Page: 69 / 103

DT290

Settings and Adjustments

Adjust earpiece volume

Press to adjust the volume during a call.

If you are not making a call you can still adjust the volume:

Press.

You hear the dial tone.

Keep listening and press.

You hear the dial tone becoming louder or quieter. If the earpiece is

at maximum or minimum volume, you hear a warning tone.

Press to cancel the adjustment procedure.

Adjust ringer volume

Route:

Settings » Alerts » RingVolume

RingVolume

Select.

Press.

A volume level bar is displayed.

Press to turn the volume up or down.

If you set the volume to its lowest level (ring sound permanently off),

the ring off icon appears.

Press to confirm.

To turn off the ring sound permanently

Press when the phone is idle.

Press.

The ring off icon appears.

Note:

If the ring sound is permanently off and you have set

the Vibrating Alert to

OnIfSilent

, the vibrator turns on

when the phone is ringing, see section

“

Vibrating Alert

” on

page 71

Silent on?

Summary of Contents for DT290








































































































Search results

Summary of Contents for DT290

Reviews:

Related manuals for DT290

Brands by name

Popular brands

Ericsson DT290, User Manual

Search results

Summary of Contents for DT290

Reviews:

Related manuals for DT290

Brands by name

Popular brands