Ericsson BS260 User Manual Download Page 45

Page: 45 / 127

Not

or Comm

l Use

ricsson Mobile

Com

unic

ons A

Answering machine

Calling in with a handset

Calling in with a handset is intended for other handset types. For the handset

that comes with the set you can conveniently use the menus instead.

To access the answering machine by calling in:

Start an internal call and dial 9.
This is the internal number of the answering machine.

Wait for the voice prompt.

Follow the instructions given by the voice guide.
If you know the key strokes by heart, you can bypass the voice guide.

End the call.

You can also use the

Voice:

menu option to call in. This menu option is only

available if new messages have been recorded on the answering machine.

To call via voice mail messages:

Route:

Voice:

Select

Voice:

and press

Y E S

Mailbox 9

is displayed.

Press

I N T

and wait for the voice prompt.

Follow the instructions given by the voice guide.
If you know the key strokes by heart, you can bypass the voice guide.

Press

N O

to end the call.

The duration of the call is displayed.

Summary of Contents for BS260
































































































































Search results

Summary of Contents for BS260

Reviews:

Related manuals for BS260

Brands by name

Popular brands

Ericsson BS260, User Manual

Search results

Summary of Contents for BS260

Reviews:

Related manuals for BS260

Brands by name

Popular brands