Ericsson BS260 User Manual Download Page 94

Page: 94 / 127

Not

or Comm

l Use

ricsson Mobile

Com

unic

ons A

Extra features

By using multiple base stations you can extend the coverage area of your

handset.

When you set the handset to automatic base station selection (default), you

can automatically connect to a subscribed base station but you cannot con-

tinue a telephone conversation while moving from one base station to another.

Multiple base stations on one telephone line

To be able to use the handset in a larger area, you can connect two or more

base stations to the same telephone line. The number of base stations you can

connect to one telephone line depends on local conditions. Please contact your

dealer for further information

You need to subscribe the handset to each base station. The handset can have

different internal numbers (1 - 8) on the various base stations.

Multiple base stations on multiple telephone lines

You can also use the handset with multiple base stations in various places,

connected to different telephone lines. In this case, the handset can have dif-

ferent internal and external numbers at different times.

Connecting to a base station

To be able to use a certain base station, the handset must be subscribed and

connected to that base station. A handset can be subscribed to multiple base

stations, but can only be connected to one base station at a time. To connect to

a base station please refer to “Selecting another base station” on page 102.

Your base station can operate in the single-cell (stand alone) mode or in the

multi-cell mode. In the multi-cell mode, the handset can be used in a larger

area in which base stations work together as one unit. It is recommended that

you leave your base station in the single-cell mode unless otherwise specified.

This function is reserved for future use.

To set the cell mode:

Route:

BaseStation » Settings » Basic » CellMode

Select

Basic

and press

Y E S

PIN:

is displayed.

Enter the PIN code for the base station (see page 78) and press

Y E S

Select

CellMode

and press

Y E S

The current cell mode is displayed.

USING MULTIPLE BASE STATIONS

SINGLE OR MULTI-CELL MODE

Summary of Contents for BS260
































































































































Search results

Summary of Contents for BS260

Reviews:

Related manuals for BS260

Brands by name

Popular brands

Ericsson BS260, User Manual

Search results

Summary of Contents for BS260

Reviews:

Related manuals for BS260

Brands by name

Popular brands