4/6
Tools Required for Assembly
STEP 4 Place the storage bracket(21) on the plates(16,17), align the holes, use 5/16”*3/5”hex socket cup head
bolt(22) and 5/16”Locknut(20)to tighten the parts as shown in FIG4.
Fig.4
STEP 2 - Place the ramp from Step 1 on top of the supporting bridge(10), use 3/8”*5”Hex bolt(13),3/8”washer (4)
and 3/8”Locknut(5) to secure L type steel plate(12) under the supporting ridge(11). Use 3/8”*3”Hex bolt(14),3/8”
washer (15) and 3/8”Locknut(5) to secure the supporting ridge(11) and L type steel plate(12). Screw all the
3/8”Locknut tight as shown in FIG2.
STEP 3 Use 3/8”-washer (19), 3/8”*3-1/4”Hex bolt(18) and 3/8”Locknut(5) to tighten left plate(16) and right
plate(17) to the supporting bridge(10) as shown in FIG3.
Fig.2
Fig.3
