Item no: 07508
5/6
STEP 5 Put ramp(23) the place shown in FIG 5, fix it by using C type safety pin(24). Remove C type safety pin (24)
when using by putting ramp(23) on either side of the ramp(1) as shown in FIG6.
Fig.5
Fig.6
Installation
Step 1: Install assembled Motorcycle Carrier into a properly installed hitch (hitch & pin not included).
Step 2: Remove pin (24) and move ramp (23) away from the main unit.
Step 3: As shown in (Fig.6) place either end of ramp (23) into the ledge of part C. Rest the opposite end of the
ramp (23) on the ground to create a slope.
Step 4: With a partner, safely guide the wheels of the vehicle up the slope of the ramp. Adjust the bolts (8)
as necessary to fit different wheel sizes
Step 5: Use weight appropriate motorcycle ratchet straps (not included) to secure the vehicle to the anchor
points on the unit. Secure front and rear tires with lashing straps.
Step 6: Remove the ramp (23) and secure it to the unit with the pin (24).
