30. KNEADING-TAPPING
Kneading-tapping Function Start/Stop Control Button - 5 levels of strength to be adjusted
When mode 2 Kneading-Tapping function is engaged, press this button to activate rhythmic mode 1.
Kneading-Tapping function for a full back massage at medium speed. Press again to activate
mode 2 Kneading-Tapping function. Press once more to stop the Kneading-Tapping function. To activate
Kneading-Tapping function directly, press this button 3 times during idle mode.
31. ROLLING
Rolling Function Start/Stop Control Button - 3 levels of width to be adjusted
When mode 2 Clapping function is engaged, press this button to activate Rolling function for a full back massage.
Press this button again to stop the Rolling function. To activate Rolling directly, press this button 3 times during
idle mode.
Note: This function cannot perform "Spot" massage function
32. WIDTH
The Width Adjustment Button for Tapping, Clapping, Shiatsu and Rolling Function
When Tapping, Clapping, Shiatsu or Rolling function is engage, every single press on this button will change
the massage width interval in the sequence of “Narrow > Medium > Wide” in cycle.
33. STRENGTH
The Strength Adjustment Button for Kneading Function
When Kneading function is engaged, every single press on this button will change the massage speed
strength interval in the sequence of “Lv1 > Lv2 > Lv3 > Lv4 > Lv5” in cycle.
34/35. SPOT/PARTIAL
The Spot or Partial Back Massage
Press this button once to activate localize Spot massage while the original massage mode continues to run
at the latest position. Press again to switch to Partial massage function.
Note: Partial Massage will take the latest position as the center to perform Partial massage with the
distance approx. 8cm.
36. SPEED
The Speed Adjustment Button for Tapping, Clapping, Swedish and Shiatsu Function
When Tapping, Clapping, Swedish or Shiatsu function is engaged, every single press on this button will
change the massage speed interval in the sequence of “Lv1 > Lv2 > Lv3 >Lv4 >Lv5” in cycle.
8
Width
