ErgoPack 700X-Li, Operating Instructions Manual, Page: 27 / 116

The ErgoPack Li-ion charging station/charger is used to charge the
ErgoPack Li-ion battery is charged.
The green or red LED display on the Li-ion charger shows various
operating states of the charger and the charge status of the Li-ion
battery.
1) Plug the mains cable into the Li-ion charger and the mains socket
as far as it will go.
2a) Carefully insert the Li-ion battery into the Li-ion charging station
(do not let the battery fall into the shaft)!
2b) Insert the charging cable into the charging socket of the Li-ion
battery as far as it will go.
3) Switch on the mains switch on the charger.

The charging process begins.
4) As soon as the battery is fully charged, the charger automatically
ends the charging process.

The LED lights up green.
5) Before removing the charged Li-ion battery, switch off the mains
switch on the charger.
LED Status
▌ ▌ ▌ ▌
green
Ready
█ █ █ █
green
Battery charges
█████████
green
Battery full
█ █ █ █
red
Battery fault
█████████
red
Charger malfunction
off
Not in operation
Explanation of symbols LED display
4.6.3 Commissioning the Li-ion Battery Charging Station/Charger
UK (Li) -27-