950-109 rev A
ergonomic products • 198 Airport Rd • Fall River, MA 02720 • 866-374-6487
PAGE 22
Safe-T-Shield™ VacTrac
Model T2B1
10 – INSERTING (OR REMOVING) THE SHIELD
INSERTING (OR REMOVING) THE SHIELD
Click here for a demonstration video or go to: www.ergonomic-products.com/safe-t-shield
The Shield is removed from the Manifold for shipping purposes. Installation (or removal) is simple
and does not require tools.
The Shield may be easily removed for replacement or as part of scheduled maintenance and
cleaning routine. See user manual for cleaning and disinfection recommendations.
To avoid damaging the Manifold, be sure the Airflow Plate is
properly installed before inserting the Shield.
10.1
10.3
10.2
10.4
To insert the Shield:
1. Carefully line up the Shield edges to the slots in the
Manifold. Gently but firmly, slide the Shield in until the
retaining tabs click (fig. 10.1).
Confirm both tabs are engaged.
To remove the Shield (for cleaning or replacement):
1. Depress the retaining tab on one side of the inner part
of the Manifold and gently angle the Shield out until free
of that tab (fig. 10.2).
2. While supporting the Shield, depress the other tab
(fig. 10.3).
3. Withdraw the Shield straight out of the slots in the
Manifold (fig. 10.4).
