Ergolux ELX-CI04-C64, Instruction Manual

Page: 7 / 8

1. Take the curling iron out of the box, remove all packing.
2. Make sure that the operating voltage corresponds to the mains voltage used in your house.
3. Unwind and stretch the power cord.
Before using your curling iron
1. Use the device solely for the intended purpose. The manufacturer is not liable for the damages resulting
from the failure to comply with requirements of this manual. The appliance should be used only for
household purposes. It is not intended for industrial use.
2. People with reduced capabilities, lack of knowledge and experience, as well as children are not allowed to
use the curling iron without monitoring or instructing regarding the application of the device to be conducted
by a person responsible for their safety.
3. Appliance packaging material may pose a hazard of suffocation for children. Keep the packaging in an
inaccessible place. It is strictly forbidden to play with the device!
4. The operating voltage of the device must match the voltage used in your home network. The hair curler
must be connected only to a network with a grounding that conforms to the established standards. When
using the device, application of non-standard power supply facilities is prohibited. Do not use electrical
extension leads, splitters and adapters to plug the hair curler. For additional protection, the installation of a
residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in
the electrical circuit supplying the bathroom. Installation is to be effected only by qualified staff.
5. Make sure that there is no damage on the housing and the power cord of the device before each power-on.
It is forbidden to plug the curling iron in the socket if any ones.
6. Do not use the appliance outdoors and do not operate near bathtubs, showers, basins or other vessels
containing water. Keep it away from flammable materials, direct sun and high temperature. Do not immerse
the appliance in any liquid.
7. Disconnect and connect the power plug by holding onto it with dry hands instead of pulling on the cord. Do
not use the appliance while bathing; never touch it with wet hands.
8. When wetting the switched-on hair curler or falling it into the water, disconnect the device from the socket
immediately. The following using of the device is possible only after checking performed by a skilled
professional.
9. During operation put the turned on curling iron only on safe bracket on a flat dry surface. Keep it away from
the edge of the working surface and vessels containing water. Keep the cord away from heated surfaces.
10. Do not use the hair curler with hair that is dripping wet, remove excessive moisture from hair with a towel.
11. Do not use styling products such as sprays while operating the appliance.
12. Do not use the appliance on artificial hair.
13. ATTENTION! Do not touch the heating barrel while the curling iron is working. This can lead to burns. If
it is necessary to use both hands, use the safety tip, it remains cold during the work of the product.
14. Never leave an appliance unattended while in use even for the short time period.
15. ATTENTION! Do not use this product near water. Do not place the heated curling iron without safe bracket
on the fabric and flammable objects.
16. Do not repair the hair curler by yourself. The appliance should be serviced by the qualified personnel only.
Attention! Warranty is invalid in case of the misuse of the appliance!
1. ATTENTION! The hair should be dried before using the curling iron.
2. Connect the device to a socket and turn it on by pushing the ON/OFF button (I/O). The operation indicator
will light up.
3. Wait until the hair curler heats up. The maximum temperature will be reached after 90 seconds. While the
curling iron heats up, it can be put on the safe bracket. Do not place heated device without the bracket.
4. Before curling, carefully comb the hair and divide them into strands about 6-8 cm wide. For finer curls, use
small strands of hair, for larger curls, use thick strands of hair.
5. Place a strand of hair on the bottom rod of the appliance. The clip must be open. Lower the clip so that the
ends of the hair are slightly peeking out from under the clip.
6. ATTENTION! Be careful not to touch the scalp with the forceps. This can lead to burns.
7. Hold the strand in this position for 10-20 seconds to form persistent tight curls.
8. Before releasing the curl, release the clip. Repeat operations with other strands of hair.
9. Advises for modeling a hairstyle:
- in order to add volume to thin hair, apply a little spraying on the roots, before drying the hair.
- in order to keep the curl for a long time, apply a firming spray to each strand of hair before curling.
- after curling, slightly spread out too tight curls with your fingers, applying a little gel or hair oil on them.
10. After use, push the ON/OFF button again (I/O), the indicator light will turn off. Put the curling iron on the
bracket, allow it to cool.
11. Unplug the appliance from the socket.
12. Do not comb your hair immediately after curling, wait until it cools down.
13. To avoid overheating of the device, do not operate continuously for more than 10 minutes and take a break
of at least 10 minutes.
Operation instructions
General Safety Requirements
6