Ergolux ELX-CI04-C64, Instruction Manual

Page: 8 / 8

1. ATTENTION! The hair should be dried before using the curling iron.
2. Connect the device to a socket and turn it on by pushing the ON/OFF button (I/O). The operation indicator
will light up.
3. Wait until the hair curler heats up. The maximum temperature will be reached after 90 seconds. While the
curling iron heats up, it can be put on the safe bracket. Do not place heated device without the bracket.
4. Before curling, carefully comb the hair and divide them into strands about 6-8 cm wide. For finer curls, use
small strands of hair, for larger curls, use thick strands of hair.
5. Place a strand of hair on the bottom rod of the appliance. The clip must be open. Lower the clip so that the
ends of the hair are slightly peeking out from under the clip.
6. ATTENTION! Be careful not to touch the scalp with the forceps. This can lead to burns.
7. Hold the strand in this position for 10-20 seconds to form persistent tight curls.
8. Before releasing the curl, release the clip. Repeat operations with other strands of hair.
9. Advises for modeling a hairstyle:
- in order to add volume to thin hair, apply a little spraying on the roots, before drying the hair.
- in order to keep the curl for a long time, apply a firming spray to each strand of hair before curling.
- after curling, slightly spread out too tight curls with your fingers, applying a little gel or hair oil on them.
10. After use, push the ON/OFF button again (I/O), the indicator light will turn off. Put the curling iron on the
bracket, allow it to cool.
11. Unplug the appliance from the socket.
12. Do not comb your hair immediately after curling, wait until it cools down.
13. To avoid overheating of the device, do not operate continuously for more than 10 minutes and take a break
of at least 10 minutes.
1. Before cleaning, unplug the appliance from the socket and allow it to cool completely.
2. Wipe the curling iron with a slightly wet cloth. Do not use abrasive cleaners. Do not immerse the appliance
in water.
3. Keep the device in places inaccessible to children. When placing the appliance, make sure that the cord
does not hang down.
4. Do not wind the power cord round the housing of the device to avoid damaging it.
5. Keep the hair curler away from direct sunlight, sharp corners, heat sources and damp.
Maintenance and storage instructions
This product doesn't require special conditions of transportation, storage and sales. The product should be
recycled after its useful life. Sales and recycling of products is carried in accordance with current legislation.
Features of sales and recycling
The appliance complies with the requirements of technical regulations of the Customs Union and the
European Union. You may download a copy of conformity certificates from the web-site www.ergolux.ru or
request it at the place of sale.
Compliance with technical regulations
Manufacturer: Litarc Lighting & Electronic Ltd., 3 Floor, Li Jing Ge 3, No. 6012, Shen Nan Road, Shenzhen,
518034, China.
Information about the manufacturer
We wish you health and beauty!
www.ergolux.ru
21
Date of manufacture, warranty and lifetime
The date of manufacture is encoded in the serial number, placed on the bottom side of the appliance, where
the last 4 digits are index numbers of the year and month accordingly.
The warranty duration is 12 months from the date of purchase. Please contact the seller for warranty service
if product replacement or refund is required in accordance with the respective local laws.
For full terms and conditions as well as hotline phone numbers please refer to the warranty card supplied
with your product.
Lifetime is 5 years. The manufacturer and importer are not liable for problems and possible losses caused by
using the goods after lifetime.