Appendix: Concerning Pallas 2000 with speed control
Speed control
This feature is used when the carer/user is of the opinion that the lifting movement is either too slow or too fast.
The speed can be regulated during use over the interval 50 – 100% of the lifting speed.
This is done by turning the speed control button which is placed on the back of the electrical box (see photo).
Turning the control clockwise will increase the speed.
Charging
•
Beeps when the charger is connected
•
The diode which is placed adjacent to the emergency stop will blink green during the charging process.
•
The same diode will show a constant green when the batteries are fully charged.
•
The lifter/hoist cannot and must not be used during the charging process.
Battery indication during use (the same light diode)
•
Constant green:
Fully charged
•
Constant yellow:
Half discharged
•
Constant red:
Fully discharged
•
The batteries should be put on charge when the lifter/hoist is not in use and if the yellow light diode is lit.
