5.3 Emergency stop
Check regularly that the emergency stop functions as prescribed by using the Pallas 2000 + Pallas 5000
(without any user) and press the red emergency button (big red emergency button on top of the electrical
box for Pallas 2000 and on the back of the control box for Pallas 5000). The hoist/lift must stop instantly.
If the emergency button is defect the Pallas 2000 + Pallas 5000 must not be used until a repair is made.
The emergency button is not an on/off switch. It always has to be “on”, meaning it must not be
pressed in!
5.4 Emergency lowering
If the Pallas 2000 + Pallas 5000 (with a defect control device) does not react whilst in use, the user can
be lowered safely by using the emergency lowering. The contact is underneath the electrical box(Pallas
2000) or on the back of the electrical control box (Pallas 5000). If the hoist/lift is lowered to it‘s end
position a fuse may blow. This is a safety procedure to ensure that the unit is checked before use.
The Pallas 5000 has clearly marked emergency points on the electrical box.
5.5 Cleaning
The actuator and the electrical box may be cleaned with a damp cloth in order to avoid the electronic
components being damaged.
The rest of the Pallas 2000 + Pallas 5000 may be cleaned with detergent or disinfectant.
6. GUARANTEE
The Pallas 2000 + Pallas 5000 is delivered with a 12 month guarantee. The guarantee does not cover
damage caused by:
- Excessive loading
- Excessive force
- Operating error
- Faulty maintenance
7. ANNUAL SERVICE
The manufacturer stipulates that this hoist/lift must be serviced by a qualified and authorised person
annually. This is also prescribed by the relevant standard EN ISO 10535. It is the customer’s
responsibility to see that this is carried out. A qualified service technician will then fill out a check list /data
sheet for the hoist/lift.
All remarks in connection with the annual service or repairs of damages must be written by the service
technician into the check list /data sheet and signed by the customer’s representative.
The responsible service technician has the right and obligation to take the Pallas 2000 + Pallas 5000 out of
service if he concludes that an existing fault may compromise safety.
All services and/or repairs carried out between the annual services must likewise be listed in the check
list/data sheet.
All supplementary works must be noted in the check list/data sheet as well.
12
