16
d
e
f
f
f
fig. 3.2C
3.3 Indstilling af stroplængde
Længden på stroppen kan tilpasses afstanden mellem skinnerne i de to rum.
1)
Stroppen kan reguleres ved at løsne skruen
d
.
2)
Herefter placeres stroppen i den ønskede position og bolten
e
placeres i den tilsvarende
løkke f (se fig. 3.2C).
3)
Sikr at skruen
d
er helt stram og at boltene er spændt inden Lunaen sættes på. Kontakt
venligst Ergolet for mere information.
The length of the strap can be adjusted to fit the distance between the tracks in the 2 two rooms
when doing a transfer between 2 rooms (see section 3.2).
1) The screw (d) is released.
2) The strap is placed in the correct position and the bolt (e) is placed in the corresponding loop
( f ) (see fig. 3.2C).
3) Ensure that the screw (d) and the bolt (e) is tightened before the Luna is mounted on the cart.
Contact Ergolet for further information.
It is important to ensure that the Luna lifting unit does not get in contact with water when using it in
a shower or bathing environment. It is important to ensure that the hand control unit is not
immersed in water. (See fig. 3.4).
Using a Luna in fixed mode, i.e. mounted on the track is the recommended solution for wet
environments, as it makes it easier to avoid contact with water.
Fig 3.4
Wrong
Right
Right