manualshive.com logo in svg

ergolet Luna/200, User Instruction, Page: 14 / 24

Share
Download
ergolet Luna/200 User Instruction Download Page 14

14

 

 

 

 

Luna is ready for use if all the assembly instructions have been followed. The hand control is 
fitted to Luna via the plug (page 10 fig. 2.1A) and is used to activate the unit. 

 only possible with Luna for 200 kg

 

 

 

 

 

 

1) Luna (a) with client is moved to the door after which the lifting 
strap from Luna (b) is extended and fitted on the extra bracket on 
the spreader bar.

 

2) The lifting strap is fitted with a bracket that fits onto the spreader 
bar. The strap is brought sideways onto the spreader bar and pulled 
downwards to fix. (See fig 1.7C) 

3) The lifting strap on Luna (a) released whilst the lifting strap on 
Luna (b) is tightened. 

4) When the lifting strap on Luna (b) is vertical and tight this means 

that the client’s weight is on this unit. The lifting strap on Luna can 

now be released. 

5) The lifting strap on Luna (a) can now be removed by releasing the 
spring loaded hook on the spreader bar (this is done best by lifting 
the hook up, press the spring and remove. The transfer can now 
continue with Luna (b) ). 

  

Fig. 3.2

 

 

 

a

 

b

 

Summary of Contents for Luna/200

























Reviews:

No comments