manualshive.com logo in svg

Erco & Gener GenPro 20e, User Manual, Page: 11 / 51

Share
Download
Erco & Gener GenPro 20e User Manual Download Page 11

 

EG_GenProxxe_988_UG_008_UK 

Page 11 / 51

 

 

Descriptions and non-contractual illustrations in this document are given as an indication only. 

 ERCO&GENER reserves the right to make any modifications. 

2.2 Packing Case 

 
Packing case external dimensions: 

- Width:  54.5 mm, 

- Height:  68 mm, 

- Length:  108 mm. 

 

An identification label is attached to the top of the packing case. It contains  

-  The ERCO & GENER logo, 

-  The product reference (GenPro xxe), 

- CE mark, 

-  Hardware WatchDog mark, 

-  The IMEI 15-digit bar code. 

 

Identification label dimensions: 

- Height:  37 mm, 

- Length:  70 mm. 

 
 

2.3 Modem Labels 

 
Two labels are attached to the underside of the modem: 

 

•

  A production label provides the following information: 

- CE mark, 

-  Crossed wheelie-bin mark (DEEE standard), 

- DC supply (VDC), 

-  Hardware WatchDog mark (WD), 

-  The IMEI 15-digit bar code.

 

 

 

 

•

  Additional marking: ROHS (2002/95/CE) and "E" (E24 10R-020250). 

 

Summary of Contents for GenPro 20e




















































Reviews:

No comments