Resetting the “Next Safety Check” Date on a VIO 300D ESU
2225 Northwest Parkway • Marietta, GA 30067 • Tel: (800) 778-3723 • Fax: (770) 955-2577
Rev. Sept. 2016
Figure 3
9.
Review the current “Date and Time” options; make any corrections at this time by simply select/highlight
the setting that requires adjusting. Using the buttons on the gray frame, press the “Up” and/or “Down”
buttons to adjust the settings.
10.
Once date and time are verified and adjusted as required, press the “Confirm/Enter” button (
See Figure
3
) to exit the Date or Time selections.
Note: Step # 10 is accomplished when the word “
More
” reappears on the glass display.
11.
Press “More” several times until “Next Safety Check” is visible.
12.
Select “Next Safety Check”.
13.
Using the buttons on the gray frame to the right of the glass display, press the “Up” button one time.
(See Figure 4)
Observe that the “Year” advances one year from the current year.
Figure 4
14.
Press the Confirm/Enter button to save the change.
(See Figure 3 above)
15.
Turn “Off” the VIO 300D, then “On” again. Ensure that the “Next Safety Check” green message does not
appear.
FOLLOW THESE STEPS WHEN THE REMINDER MESSAGE “NOT” PRESENT
Note: All button selections will be made with the buttons on the glass display of the unit unless
otherwise stated.
