Erbe VIO 3, Manual

Page: 18 / 124

18
This product must not be used in the vicinity of a Magnetic Res-
onance Imaging (MRI) System.
Before each use, check that the footswitch assembly is intact and
that the connecting cable insulation is not damaged. Verify that
there are no signs of physical damage. Check/Verify that the
footswitch functions properly.
Checks other than those described in these instructions for use
do not need to be carried out.
If damaged, do not use this product!
Never lay this product on the patient or in his/her direct vicinity.
Protect this product from any form of mechanical damage! Do
not throw! Do not use force! If there is a cable, and unless stated
otherwise, do not kink it or wrap it around the accompanying
product!
Erbe Elektromedizin expressly warns against modifying the
product. Any modification exempts Erbe Elektromedizin from
any and all liability.
4
How to Use
4.1 Only use Cleaned and Disinfected Products
Clean and disinfect the product before using for the first time
and before every reuse.
4.2 Checking the Product
Before each use, check that the footswitch assembly is intact and
that the connecting cable insulation is not damaged. Verify that
there are no signs of physical damage.
If damaged, do not use this product!
OBJ_DOKU-194049-007.fm Seite 18 Dienstag, 20. August 2019 7:02 07