Erbe 20191-143, Manual

Page: 31 / 264

31
7.10 Check
1. Check the product for visible damage and wear:
– Damage to the product, e.g. cracks, rough surface, splin-
tering.
– Damage to the product insulation and/or cable/connec-
tor insulation, e.g. cracks and breaks.
– Bending of the product or parts of the product. Do not at-
tempt to straighten bent instruments!
If damaged, do not use this product!
2. Check the mechanical functionality of the product:
– Can the needle be extended and retracted at all three
levels?
7.11 Closing the irrigation connection on the electrode
handle and retracting the needle
1. Screw the included Luer-Lock connection onto the irrigation
connection of the electrode handle.
2. Make sure that the needle is fully retracted.
7.12 Packaging
1. Pack the product in disposable sterilization packaging (single
or double packaging) made from paper/foil and/or in a ster-
ilization container.
7.13 Sterilization
Only sterilize products that have been cleaned and disinfected.
Erbe Elektromedizin recommends steam sterilization with the
method described below. If other sterilization methods are used,
Erbe Elektromedizin shall bear no responsibility.
OBJ_DOKU-189636-004.fm Seite 31 Donnerstag, 13. Oktober 2016 12:51 12