Erbe 20134-001, Notes On Use

Page: 17 / 174

17
IMPORTANT!
Please read all information carefully.
These instructions for use do not replace the user manual of the
APC unit used! Read the user manual of the APC unit and ask
Erbe or your distributor in case of doubt!
1
Storage and transport
The corresponding national regulations or international agree-
ments must be observed with regard to transportation. Generally
the following is applicable:
• Gas cylinders may only be transported with a valve guard
(e.g. cylinder cap).
• Cylinder valves must be tightly sealed.
• Gas cylinders may not be thrown or exposed to impact.
• Gas cylinders placed in a horizontal position must be wedged
in or secured in such a way that they do not roll. Gas cylin-
ders may also be transported upright when appropriate
equipment (e.g. pallets) is used. Gas cylinders must be se-
cured during transport in such a way that damage as a result
of other items is excluded.
2
Normal Use
The argon gas cylinder is intended exclusively for connection to
an Erbe APC 2 or an Erbe APC 3 unit.
The APC pressure reducer with sensor is intended exclusively for
connection to an argon gas cylinder aimed at supplying argon to
the Erbe APC 2 or Erbe APC 3.
Only argon (Ar) may be used as the working gas.
OBJ_DOKU-194196-002.fm Seite 17 Freitag, 30. Oktober 2015 10:23 10