background image

18V MULTI TOOL 

     ERI616HTL

battery pack is not in use, keep it away from other metal objects, 

like paper clips, coins, keys, nails, screws or other small metal 

objects, that can make a connection from one terminal to another. 

Shorting the battery terminals together may cause burns or a fire.

c)  Do not expose battery pack to heat or fire.

 Avoid storage in 

direct sunlight.

d)  Do not subject battery pack to mechanical shock.

e)  In the event of battery leaking, do not allow the liquid to 

come into contact with the skin or eyes.

 If contact has been 

made, wash the affected area with copious amounts of water and 

seek medical advice.

f)  Seek medical advice immediately if a cell or battery pack has 

been swallowed.

g)  Keep battery pack clean and dry.

h)  Wipe the battery pack terminals with a clean dry cloth if they 

become dirty.

i)  Battery pack needs to be charged before use.

 Always refer to 

this instruction and use the correct charging procedure.

j)  Do not maintain battery pack on charge when not in use

.

k)  After extended periods of storage, it may be necessary to 

charge and discharge the battery pack several times to 

obtain maximum performance.

l)  Battery pack gives its best performance when it is operated 

at normal room temperature (20°C ± 5°C).

m)  When disposing of battery packs, keep battery packs of 

different electrochemical systems separate from each other.

n)  Recharge only with the charger specified by POSITEC . Do 

not use any charger other than that specifically provided for 

use with the equipment.

 A charger that is suitable for one type 

of battery pack may create a risk of fire when used with another 

battery pack. 

o)  Do not use any battery pack which is not designed for use 

with the equipment.

p)  Keep battery pack out of the reach of children.

q)  Retain the original product literature for future reference.

r)  Remove the battery from the equipment when not in use.

s)  Dispose of properly.

 

 

Warning:

 

If a small amount of electrolyte should leak from 

the battery pack under extremes of temperature or after 

Summary of Contents for ERI616HTL





























Reviews: