Erbauer ERB612GRD, Manual

Page: 7 / 28

850W 125mm ANGLE GRINDER ERB612GRD
create a hazard and cause personal injury.
3. Do not use accessories which are not specifically designed
and recommended by the tool manufacturer.
Just because
the accessory can be attached to your power tool, it does not
assure safe operation.
4. The rated speed of the accessory must be at least equal to
the maximum speed marked on the power tool. Accessories
running faster than their rated speed can break and fly apart.
5. The outside diameter and the thickness of your accessory
must be within the capacity rating of your power tool.
Incorrectly sized accessories cannot be adequately guarded or
controlled.
6. Threaded mounting of accessories must match the grinder
spindle thread.
For accessories mounted by flanges, the arbour
hole of the accessory must fit the locating diameter of the flange.
Accessories that do not match the mounting hardware of the
power tool will run out of balance, vibrate excessively and may
cause loss of control.
7. Do not use a damaged accessory. Before each use inspect
the accessory such as abrasive wheels for chips and
cracks, backing pad for cracks, tear or excess wear. If power
tool or accessory is dropped, inspect for damage or install
an undamaged accessory. After inspecting and installing an
accessory, position yourself and bystanders away from the plane
of the rotating accessory and run the power tool at maximum no-
load speed for one minute. Damaged accessories will normally
break apart during this test time.
8. Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses.
As appropriate, wear dust mask, hearing protectors,
gloves and workshop apron capable of stopping small abrasive
or workpiece fragments. The eye protection must be capable
of stopping flying debris generated by various operations. The
dust mask or respirator must be capable of filtrating particles
generated by your operation. Prolonged exposure to high
intensity noise may cause hearing loss.