Erbauer ERB612GRD, Manual

Page: 19 / 28

850W 125mm ANGLE GRINDER ERB612GRD
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
INTENDED USE:
The machine is intended for roughing and brushing
metal and stone materials without using water. For
cutting, a cutting guard for cutting (accessory) must
be used.
ASSEMBLY AND ADJUSTMENT
MOUNTING THE PROTECTIVE DEVICES
1. AUXILIARY HANDLE
For all work with the machine, the auxiliary handle
(3) must be mounted.
Screw the auxiliary handle (3) on the right or left
of the machine head depending on the working
method. (See Fig.1)
Do not make any alterations to the
auxiliary handle.
Do not continue to use an auxiliary handle if it
is damaged.
Mounting the grinding or cutting blade
Before any work on the machine itself, pull the
mains plug.
Grinding and cutting discs become very hot
while working; do not touch until they have
cooled.
1. SPINDLE LOCK BUTTON
Clean the grinder spindle and all parts to be
mounted. For clamping and loosening the grinding
tools, lock the grinder spindle (7) with the spindle
lock button (4).
Actuate the spindle lock button (4) only when the
grinder spindle is at a standstill!
2. GRINDING/CUTTING DISC
Pay attention to the dimensions of the grinding
disc. The mounting hole diameter must fit the inner
flange (6) without play. Do not use reducers or
adapters.
When using a diamond cutting disc, take care that
the direction-of-rotation arrow on the diamond
cutting disc and the direction of rotation of the
machine (direction-of-rotation arrow on the
machine head) agree.
Fig. 1
Fig. 2
Fig. 3-1
Fig. 4
Fig. 3-2
Fig. 5
1