Erbauer ERB379PLN, Original Instructions Manual

Page: 7 / 25

4MM PLANER
of control and serious injury.
2. Hold the power tool by insulated gripping surfaces only,
because the cutter may contact its own cord.
Cutting a “live”
wire may make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
3. Use clamps or another practical way to secure and support
the workpiece to a stable platform. Holding the work by hand
or against your body leaves it unstable and may lead to loss of
control.
4. Always wear safety glasses or eye shields when using the
Planer Everyday eyeglasses have only impact-resistant
lenses; they are NOT safety glasses. Following this rule will
reduce the risk of serious personal injury.
5. Always wear hearing protection during extended periods
of operation.
Following this rule will reduce the risk of serious
personal injury.
6. Keep your hands away from cutting area.
Do not reach under
the material being cut because the nearness of the blade to your
hand is hidden from your sight.
7. Do not use dull or damaged blades. Bent blades can break
easily, or cause kickback.
8. Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
9. Fully unwind cable drum extensions to avoid potential
overheating.
10. When an extension cable is required you must ensure it has
the correct ampere rating for your power tool and is in a safe
electrical condition.
11. Ensure your mains supply voltage is the same as indicated on
the rating plate.
12. Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
13. Always check walls, floors and ceilings to avoid hidden power
cables and pipes.
14. After long working period, external metal parts and accessories
could be hot.
15. Only withdraw the blade from the cut when the blade has been
stopped moving.
16. The pivoting blade foot must be held firmly against the material