10
GENERAL DESCRIPTION
This ROTARY HAMMER can be used for hammer
drilling and chiselling in masonry etc. work. The
machine uses a single phase alternating current
110V or 230V, 50Hz motor, its compact and ro-
bust format makes it versatile and efficient for
uses described in specific safety instructions. It
complies with current regulations and the opti-
mum quality of materials used will ensure a long
working life in complete safety.
OPERATION INSTRUCTIONS
WARNING:
Before using your Rotary
Hammer be sure to read the instruction
manual carefully.
Note:
Make sure the hammer is isolated from
the mains supply before fitting accessories. Be-
fore undertaking any maintenance or operations
on the rotary hammer isolate the plug from the
power supply.
1. AUXILIARY HANDLE
(See Fig. 1, 2, 3)
Adjust the position of the auxiliary handle by
turning the grip anti-clockwise to loosen the col-
lar to suit application and add the depth gauge
(4) if required.
Always use the auxiliary handle where possible
to gain extra control and to prevent fatigue.
2. USING THE DEPTH GAUGE
(See Fig. 4)
Loosen off the depth gauge retaining screw (3)
insert depth gauge (11) into the handle. Adjust
the depth gauge to desired depth and re-tighten
the depth gauge retaining screw.
3. FITTING SDS-MAX DRILL BITS
(See Fig. 5, 6)
This rotary hammer is equipped with an SDS-
Max attachment system. The SDS-Max tools
have slots in the shank. These locate with tabs in
the rotary hammer.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Summary of Contents for ERB121SDS
