70W SCROLL SAW
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
1. Cleaning
There are no user serviceable parts in your pow-
er tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all work-
ing controls free of dust. Occasionally you may
see sparks through the ventilation slots. This is
normal and will not damage your power tool.
2. Lubrication
Arm Bearings - Lubricate the arm bearings with
oil after 10 hours of use. Re-oil after every 50
hours of use or whenever there is a squeak com-
ing from the bearings.
To Lubricate:
Turn saw on its side.
Squirt a generous amount of SAE 20 oil around
the shaft end and bronze bearing.
(See Fig.I)
Let the oil soak in overnight in this condition.
Next day repeat the above procedure for the op-
posite side of the saw.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
ENVIRONMENT PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. For further
information visit www.recycle-more.co.uk
Fig.H4
Fig.I
Summary of Contents for ERB110SSW
Page 1: ...70W SCROLL SAW ERB110SSW WARRANTY YEARS...
Page 2: ......
Page 23: ...70W SCROLL SAW...
Page 24: ......
