Erbauer ERB110SSW, Manual

Page: 18 / 24

5. Using the dust blower tube (see Fig.G)
Align the dust blower tube (5) towards the saw
blade to blow sawdust away from the sawblade
cutting line.
6. Installing the flexible drive shaft (see Fig.
H1—Fig.H4)
Disconnect from mains supply and ensure ma-
chine is switched off.
Remove the cover from flexible shaft drive aper-
ture.
(Fig.H1 & Fig.H2)
Insert the flexible drive shaft into the aperture.
Fitting accessories to the flexible shaft.
Insert the spindle lock (g) into the hole situated in
the handle of the flexible shaft. Turn the collet nut
until the spindle lock engages and prevents the
shaft rotating.
(See Fig.H3)
. Insert the required
accessory and tighten the collet with the wrench
provided.
(See Fig.H4)
Remove the spindle lock.
OPERATING THE FLEXIBLE SHAFT
Follow these guidelines when operating the tool.
Always allow the tool to operate as it was de-
signed. Never force the flexible shaft.
Secure the workpiece to prevent movement.
Hold the tool tightly and keep it a safe distance
from other persons. Always point the bit away
from your body.
Slow speed is best for polishing operations, deli-
cate woodcarving, or working on fragile model
parts. High speed is suitable for operation on
hardwoods, metals and glass, such as: carving,
routing, shaping, cutting and drilling.
WARNING:
To avoid risk of injury please ensure the
blade guard is assembled and positioned over
the saw blade when using the flexible shaft.
AFTER OPERATION
Do not touch the moving part when the flexible
shaft is just switched off.
Do not put down your tool before the working
head stops rotating.
Fig.H1
Fig.H2
Fig.G
Fig.H3