8” THICKNESS PLANER
SYMBOLS
Read the manual
Warning
Wear gloves
Wear dust mask,eye & ear protection
Conforms to relevant safety standards
19. Check the amount of cut on the blade before using the machine.
20. Never attempt a heavy cut in short stock.
21. Avoid cutting across the grain.
22. Use the push pads to keep your hands well away from the blades, particularly for
shorter stick planing. Do not attempt to feed work pieces that are shorter than the
minimum length specified in the technical data of the tool.
23. Advance the material to the cutting head for normal operation by sliding it along the
table, never by placing it directly on the cutting head.
24. Never leave the machine set to a heavy cut, always reduce it to a minimum cut.
25. Use cutting blades designed for this machine only.
26. Rectify the faults including guards and cutter block immediately as they are
discovered.
BTP210F-M-070928.indd 7
2007-9-28 13:35:54
