background image

7

c.  Do n

ot expose power tools to rain or wet conditions. Water 

entering a power tool will increase the risk of electric shock.

d. Do

 not abuse the cord. Never use the cord for carrying, 

pulling or unplugging the power tool. Keep cord away 

from heat, oil, sharp edges or moving parts

.

 Damaged or 

entangled cords increase the risk of electric shock.

e. W

hen  operating  a  power  tool  outdoors,  use  an 

extension  cord suitable for outdoor use. Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

f. If

 operating a power tool in a damp location is unavoidable, 

use a residual current device (RCD) protected supply. 

Use 

of an RCD reduces the risk of electric shock.

PERSONAL SAFETY

a. St

ay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a power tool 

while you are tired or under the influence of drugs, alcohol 

or medication. 

A moment of inattention while operating power 

tools may result in serious personal injury.

b. Use

 personal protective equipment. Always wear eye 

protection. 

Protective equipment such as a dust mask, non-

skid safety shoes, hard hat, or hearing protection used for 

appropriate conditions will reduce personal injuries.

c. Pr

event unintentional starting. Ensure the switch is in the 

off- position before connecting to power source and/or 

battery pack, picking up or carrying the tool

.

 Carrying power 

tools with your finger on the switch or energising power tools 

that have the switch on invites accidents.

d. Re

move any adjusting key or wrench before turning the 

power tool on

A wrench or a key left attached to a rotating 

part of the power tool may result in personal injury.

e. Do

 not overreach. Keep proper footing and balance at 

all times.

 

This enables better control of the power tool in 

unexpected situations.

Summary of Contents for EHTIW18-Li





























Reviews: