background image

2006/42/EC as amended     Machinery Directive 

2014/30/EU as amended     Directive Electromagnetic compatibility 

2011/65/EU as amended      Directive Restriction of the use of certain hazardous substances in 

electrical and electronic equipment 

Directive 2006/42/CE relative aux machines 

2014/30 / UE telle que modifiée Directive Compatibilité électromagnétique 

Directive 2011/65/UE relative à la limitation de l’utilisation de certaines substances dangereuses 

dans les équipements électriques et électroniques 

2006/42/WE w zmienionej dyrektywie maszynowej 

2014/30 / UE ze zmianami Dyrektywa Kompatybilność elektromagnetyczna 

2011/65 / UE ze zmianami Dyrektywa Ograniczenie stosowania niektórych niebezpiecznych 

substancji w sprzęcie elektrycznym i elektronicznym 

2006/42/CE, astfel a fost modificată Directiva privind echipamentele 

2014/30/UE, astfel a fost modificată Directiva privind compatibilitatea electromagnetică 

2011/65/UE, astfel a fost modificată Directiva privind limitarea utilizării anumitor substanțe 

periculoase în echipamentele electrice și electronice 

Directiva sobre maquinaria modificada 2006/42/CE 

2014/30/UE modificada Directiva Compatibilidad electromagnética 

2011/65/UE modificada Directiva Restricción del uso de determinadas sustancias peligrosas en 

equipos eléctricos y electrónicos 

2006/42/CE como diretiva de máquinas alteradas 

2014/30/UE como alteração da compatibilidade eletromagnétic 

2011/65/UE como restrição diretiva alterada da utilização de certas substâncias perigosas em 

equipamentos elétricos e eletrónicos
References to the relevant harmonised standards used or references to the other technical 

specifications in relation to which conformity is declared: 

Références des normes harmonisées pertinentes appliquées, y compris la date de celles-ci, ou 

des autres caractéristiques techniques, y compris la date de celles-ci, par rapport auxquelles la 

conformité est déclarée: 

Odwołania do odnośnych norm zharmonizowanych, które zastosowano, wraz z datą normy, lub do 

innych specyfikacji technicznych, wraz z datą specyfikacji, w odniesieniu do których deklarowana 

jest zgodność: 

Trimiteri la standardele armonizate relevante folosite, inclusiv data standardului, sau trimiteri 

la celelalte specificații tehnice, inclusiv data specificațiilor, în legătură cu care se declară 

conformitatea: 

Referencias a las normas armonizadas pertinentes utilizadas, incluidas las fechas de las normas, 

o referencias a las otras especificaciones técnicas, incluidas las fechas de las especificaciones, 

respecto a las cuales se declara la conformidad: 

Referências às normas harmonizadas aplicáveis utilizadas, incluindo a data da norma, ou às 

outras especificações técnicas, incluindo a data da especificação, em relação às quais é declarada 

a conformidade:
EN 62841-1:2015 

EN 62841-2-2:2014 

EN IEC 55014-1:2021 

EN IEC 55014-2:2021

Summary of Contents for EHTIW18-Li





























Reviews: