WARNING!
Don’t hit the valve clearance button (5a) with a hard object,
otherwise it will be damaged.
Operation
1. Check the product, its power cord and plug as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
2. Double check that the accessories and attachments are properly fixed.
3. Always hold the spray gun by its handle (12). Keep the handles dry to ensure safe
handling.
4. Ensure that the air vents (24) are always unobstructed and clear. Clean them
if necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
5. Switch the product off immediately and set the Prime/Spray lever to the prime
mode if you are disturbed while working by other people entering the working
area. Always let the product come to complete stop and lock the trigger (15) before
putting it down.
6. Do not overwork yourself. Take regular breaks to ensure you can concentrate on
the work and have full control over the product.
01
Cleaning and starting the paint sprayer (Fig. L)
NOTE:
The product is tested in factory for performance and shipped with
test fluid in the pump to prevent corrosion during transport and storage.
Whether you are spraying latex or oil based paints, the fluid must be
cleaned and thoroughly removed from the system.
This procedure is used for first time operation and also to flush storage fluids out of the
paint sprayer.
Priming Water-Based (Latex) Paint: Flush with warm clean water.
Priming oil-based Paint: Flush with mineral spirits followed by warm clean water.
MNL_Erbauer_GB_EAPS600_600W Airless Paint Sprayer_V1_201029.indd 33
10/29/20 3:31 PM
34
