14
Calculating the actual period of the actual period off use can
be difficult and the HSE website has further information.
The declared vibration total value has been measured in
accordance with EN 62841-1 and EN 62841-2-4 and may be
used for compare one tool with another.
The declared vibration total value may also be used in a
preliminary assessment of exposure.
WARNING!
The vibration emission during actual
use of the power tool can differ from the declared
total value depending on the ways in which the tool
is used:
• How the materials are grinded, cut or drilled.
• If the tool is in good condition and well maintained.
• Use correct accessory for the tool and ensure it is
sharp and in good condition.
• The tightness of the grip on the handles.
• The tool is being used as intended by its design
and these instructions.
While working with this power tool, hand/arm
vibrations occur. Adopt the correct working
practices in order to reduce the exposure
to vibration. This tool may cause hand-arm
vibration syndrome if its use is not adequately
managed.
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 14
6/7/18 10:47 AM
