3
SAFETY INSTRUCTION
ERA CCTV
Safety
This device has been manufactured in accordance with international safety standards. Please
read the enclosed safety information and installation guide fully before proceeding and retain
for future use.
1.
Unpack all components carefully and check box contents. If any items are missing, please
return the product in its original packaging to your retailer.
2.
Install in accordance to manufacturer’s instructions.
3.
Use only attachments and accessories specified by the manufacturer.
4.
Do not install next to a water source, any heat source, in direct sunlight and do not block
any ventilation openings. As this is a wireless device communicating over Wi Fi network,
please avoid installing near fridges, microwaves and cookers, as electrical interference may
occur.
5.
Ensure products are fixed to a suitable, stable surface to prevent accidental falls and damage
to the products.
6.
Products are fitted with ventilation openings to the rear, which should not be covered at
any time. This product should not be fitted in a built in installation unless proper
ventilation is provided (min. 10 cm).
7.
Safeguard the power cord by observing the following information:
- Do not modify or manipulate the power cable or plug.
- Do not allow anything to rest on the power cord and do not position where there is a risk
of the cable being stepped on.
- Ensure the mains cable is positioned away from any heating equipment, damp or moisture.
8.
This product is equipped with a 3 wire grounding plug. Only operate this device using the
appropriate power source as detailed on the back of the product. If you are unsure please
contact your electrician. Disconnect the device from the power supply before carrying
out maintenance or installation.
9.
Never open the housing or power supply unit. Do not insert any object into the product,
as this could lead to an electric shock.
10.
If any of the following occur, unplug this product from the wall and contact our helpline:
- Power cord or plug is damaged.
- Liquid has been spilled into the product.
- Product does not operate normally, when the operating instructions have been followed.
- Product has been dropped or damaged.
11.
Unplug the product from the wall before cleaning. Carefully clean surface with a soft,
damp cloth, taking care not to scratch the surface finish. Do not use any liquid or aerosol
cleaners.