ERA WIRELESS HD CCTV SYSTEM, User Manual, Page: 18 / 24

17
End Time:
record end time
Start time:
record start time
6.5.2 Scheduled Recording Mode
To schedule a recording press “ MENU ” > “ Record Setting ” and enter “ Schedule Record ”.
Enter the schedule settings by pressing “ PLAY ”
Choose one or more cameras to record by using the previous and next button and accept
by pressing “
PLAY ”.
To set start and end time use the next button to jump to time setting.
To set start and end time use the up and down buttons.
To choose the day or recording use the next button to jump to day setting.
Select day by pressing “
PLAY ”. It is possible to choose more than one day.
To confirm the recording go to “ SET ” by using the next button and press “ PLAY ”.
To view your scheduled recordings you can browse through the calender by using the
previous and next buttons. Please note that the date and time have to be set correctly
to ensure the successful scheduled recording (see 6.4 for date and time setting).
To delete a scheduled recording simply create an identical scheduled recording and press
“DEL” instead of “
SET ”.
10
9
8
7
6
5
4
3
2
1
Setup ERA CCTV
4
3
2
1
6.5.3 Motion Detecting Recording Mode
In this mode the receiver starts recording when motion is detected by any activated camera
To activate a camera press “ MENU ” > “Record Setting” and select “ Record Mode ”.
Use the up and down buttons to select a camera; and then using the previous and next
buttons select the mode “
Motion ”.
Enter the settings by pressing “ PLAY ”
NOTE: To adjust the sensitivity of the motion detection go to “ Motion Detection ” in the
“ Record Settings ” menu. Use the up and down buttons to select a camera and previous and
next buttons to select the level of sensitivity.